UPDATES ON SPORT 24HD @57E WITH LATEST SOFTWARE FOR STRONG DECODER

About 30hours ago, i received a call concerning the sport 24HD which its signal turns to red, i mean “no or bad signal” but the first thing that came to my mind according to complainer that the other channels on the same position were still intact then i suggest him to do Blind Scan if it possible that the service provider may be change the frequency or symbol rate after some minutes and the guy sent his testimony that both frequency and symbol rate were changed, as a result of this of this maintenance make the signal to improve and as a matter of facts you can now track/install  sport 24HD on 57E with at least 1.8m dish and good c-band lnb preferably strong product and if you have installed your dish properly and signal lost all what you needs to do manual add new tp 4131 R 11250 or do blind scan to get your sport 24hd back.

IMG-20160802-WA0054

STEPS TO INSTALL SPORT 24HD @57E

  • make sure you gave at least 1.8m dish, cband lnb.
  • place your lnb to 5 o’clock.
  • first track bfbs sport on 3800 R 20000 and make sure your sginal strength reaches 80%.
  • manually input 4131 R 11250 for sport 24hd and make sure the signal reaches 60% above.

LATEST SOFTWARE FOR STRONG DECODER

You can follow this link to learn on how to upgrade your decoder through this link and to add powervu key follow this link.

one of the best decoder that autorole powervu decoder is freesat deoder and it is the future decoder and for complaints and enquiry contact me on info@peacesat.com or whatsapp: +2348036143281 or skype: @ayokunmi8.

Advertisements

16 thoughts on “UPDATES ON SPORT 24HD @57E WITH LATEST SOFTWARE FOR STRONG DECODER

  1. Abuja residents can contact 08064662957 for FTA installations or dish repositioning against the on going Rio Olympics. # Free To Air

    Like

    1. @sampson, press menu goto installation then select antenna setup choose satellite nss 7c then press blue button to scan then scroll down to change the scan mode to blindscan then press OK wait for about approximately 3minutes it will finish the scanning then press exit to the screen then you are good to go if doesn’t bring any channels that means you needs to setup the diseqc according to their corresponding port or you choose wrong satellite

      Like

      1. Good morning sir. Please I tried the procedure you gave me yesterday but it only came with stations like Atlantic, sports, news, CH-232. The sports 24 couldn’t come so any other procedure?

        Like

              1. Good morning sir. Please I was doing the upgrade but it was quite unfortunate that the lights went off and came back within some seconds. Since then the decoder doesn’t work. Only the red light comes on and nothing again. Does that mean it has damaged the decoder or?

                On Aug 24, 2016 4:48 PM, “Peacesat and mobile Communication” wrote:

                > Omokunmi Ayoola Nurudeen commented: “@sampson, +2348036143281” >

                Like

                1. @Ankomah, that’s why I was keeping saying to avoid power failure do you think i’m lying now your decoder is temporarily dead not permanent but cause you stress and money to wake it back, it is optional but I advise you to buy new decoder of your choice

                  Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s