DOWNLOAD LATEST AUTO ROLE POWERVU SOFTWARE FOR ALPHABOX X4, OPENBOX Z5 MINI, AONE AND AZPLAY

        In my previous post which I release the software fixing auto role powervu for Alphabox X4, updating key without internet, another software was also release in the following day whether you upgrade or not before now here is the latest software which your Alphabox X4 should be running now and as far as other Alphabox X4 family decoder is concern the latest software is out for openbox z5 mini, Aone and Azplay this software was designed according to the continent you belongs to may be Africa and Asian and please make sure you download the right software for your decoder otherwise it won’t work as effectively if the wrong software was installed on your decoder and you can download from this link below.

=====> ALPHABOX X4

=====> OPENBOX Z5 MINI (AFRICA)

=====> OPENBOX Z5 MINI (ASIA)

=====> AONE DECODER

=====> AZPLAY (AFRICA)

=====> AZPLAY (ASIA)

image

STEPS TO UPGRATE ALPHABOX X4

——> Copy the file into pendrive or flash drive please note that the file is already extracted

——> Plug the pendrive or flash drive into the decoder via USB port

——> Reboot the decoder wait till your decoder read the pendrive to display LOAD and UXXX till software upgrade counter reach 100, then wait your decoder display load again then immediately remove the flash drive or pendrive to avoid starting over

——> After successfully booting and welcome graphic display then scan any of the powervu channels of your choice especially sport 24HD the channels will be working after scanning

STEPS TO UPGRADE OPENBOX Z5 MINI, AONE AND AZPLAY

====> Rename the file into Rom.bin

=====> copy the software into the flash drive, then plug it into your decoder via USB port,

=====> Reboot the decoder wait till your decoder read the pendrive to display LOAD and UXXX till software upgrade counter reach 100, then wait your decoder display load again then immediately remove the flash drive or pendrive to avoid starting over

=====> Scan the channels back and it will start blazing

image

STEPS TO UPDATE CHAMPION TV AND BWTV SOFTCAM KEY

Please note that this require internet and follow these steps below

======> Connect your decoder to the internet through 3G modem or wifi or LAN by press menu====> settings ======> network configuration =====> choose link type (3G for modem, wifi and LAN cable may be from router ) make sure you tick auto link, after network connection success

=====> Press menu, navigate to access control Openbox,Aone and Azplay but on alphabox x4 naviagte to settings then dial 2778 from your remote control to pop up access control menu, then scroll down to “key editor” press Ok,

CONCLUSION

Please note that the above software fixing auto role powervu key update without internet and also you can use internet to update key if you like, champion tv and bwtv key will be update via Internet you can your request and queries into [email protected], WhatsApp:- +2348036143281 and Skype:- ayokunmi8

88 Comments

Add a Comment