This topics is late but to late is better than never, I will release the latest software for popular strong decoder which is SRT 4922A and 4950H/M which solving powervu patch menu and iptv on 4922A and new graphics and IPTV on SRT 4950M/H
===>Download the latest software by click on SRT 4922/4922A, SRT 4950M and SRT 4950H.
DISCLAIMER:- I am not reliable and to put to blame if you brick your decoder you are doing it at your own risk and make sure use generator for power stability and any power failure will brick your decoder please take note.
STEPS TO UPGRADE
- Copy the software to flash drive or memory card.
- Insert it to your decoder via USB port at the back or front panel.
- Wait for some seconds for your decoder to read your memory card content to be ready use.
- Press—-menu—-navigate to external device/USB upgrade—–locate software e.g (4922….stb or 4950M…..bin), then press OK button to start upgrading after finish wait till your decoder reboot successfully then you are done
HOW TO REVIVE DEAD SRT 4950M/4950H ONLY
Despite the fact that the warning I gave you before upgrading I will still find many that will brick their decoder coincidencely and carelessly that’s why I will give you the software to revive the decoder after it get brick.
===>Download Revive file for SRT 4950H and SRT 4950M or rename any of the above software to ROM.bin
STEPS TO REVIVE DEAD SRT 4950
- Rename and copy the file into memory card or pendrive and make sure the file is the only one inside the memory card or pendrive and make sure it is virus free
Insert the memory card/pendrive into your decoder through USB port.
Power on your decoder and wait for 5seconds, check if the front panel shows upgrade process but if it fail that’s means you needs to change the memory card or pendrive and you are done if it works and reboot successfully after the upgrading.
Further assistance you can contact me on [email protected] or WhatsApp :- +2348036143281 or Skype:- @ayokunmi8