I know many people out there might be waiting for this article to come up because you might be found it difficult to revive or wake up your dead android tv box most especially Ancloud tv box same step can be use to upgrade your tv box or wake up if bricked coincidence and intentionally and please take note the software below is only meant for ancloud p5 only and you can contact your supplier to get you appropriate firmware that can work on your tv box and below steps are the stable and reliable for reviving your dead ancloud P5 android tv box tested and confirmed
STEPS TO UNBRICK OR UPGRADE
1. Download upgrade firmware package ZIP FILE HERE and don’t extract it, then Copy the upgrade package to the root directory of the U disk or flash drive and make sure it is formatted before use
2. Off your decoder and use toothpick to press and hold the reset button at the back of your ancloud P5 tv box as shown below 3. Power on and continuously hold the reset button using the toothpick and don’t let your hand shake to avoid error when the first power on interface appeared wait for about 30seconds or press and hold menu key until the following interface appeared as shown below
4. Select the 3rditem【apply update from EXT】, press OK key to enter as shown above
5. Select the 2nd item【Update from udisk】, and press OK key to enter6. Select the upgrade package in Udisk, and press OK key, the following interface will appeared to show the upgrade schedule. DO NOT power off when upgrading, this will takes unrecoverable damage.7. When appeared the words 【Install from udisk complete.】, and back to the following interface8. Select the fifth item【wipe data/factory reset】, press OK key to enter9. Select 【Yes—delete all user data】as shown belowwait for some minutes for the decoder to reboot and setup other necessary thing after successful booting to the welcome screen interface then you are good to go, If you still find it difficult to wake up or upgrade your ancloud p5 tv box, then you need to observe the following things and do the correction:
- Carelessly not press and hold the reset button till recovery boot menu to pop up
- Failure to copy the firmware to the root of the USB disk or using incompatible firmware
- Using Faulty USB disk
- Skip to do the factory reset/wipe
For further assistance kindly send your request to email: [email protected] or [email protected] or WhatsApp: +2348036143281 or Skype: @ayokunmi8.
Product in Stock
FREESAT V8 SATFINDER
Product Function: 1. Fully DVB compliant, Live FTA Digital Picture and Sound; 2. 3.5 inch LCD Colour Screen; 3. Lithium-ion 3000mA Battery,Normal work up to 4 hours; 4. Support AV in and AV/HDMI out function; 5. Support 13V/18V/LOCK status panel LED display directly; 6. Support battery power display...
Tiger T3000 has the following features/specification as thus: ARM Cortex-A9 CPU 3D Graphics Processor A52 Advanced NEON which includes ARM NEON SIMD extentions. Android version 4.0.4 Support both SD and HD video output format: 480i/p, 576i/p, 720p and 1080i 3G, WIFI, LAN. IPTV Access to app store Mp...
TIGER T8HD ULTRA
Tiger T8HD ultra opening OTE Sports for those who have access to their signal with MY HD iptv server for 3month and 15month for forever server for both satellite key sharing (SKS) and internet key sharing (IKS)
WIFI STICK/ WIFI ADAPTER
WIFI Transmitter for sharing internet on any supported satellite decoder like SRT4922,GSKY,FREESAT DECODER & LAPTOP
FREESAT V7 MAX
1, 1080P Full HD DVB-S2 2, Support PowerVu,DRE & Biss key 3, Support USB PVR Ready and USB wifi to Network Sharing 4, Support Full speed USB 3G dongle 5, Support YouTube, Youporn via usb Wifi dongle 6, Support Cccam, Newcam via usb Wifi dongle
PENDOO X5 PRO TV BOX
Support 4K Video Format Fully Configure with Free IPTV app For Streaming Live matches like EPL,UCL,FA CUP, CARLING CUP, LA LIGA, UEFA CUP, KINGS CUP, and so
1. support free wcam server for starhub cable signal and mio stadium to watch EPL 2. support IPTV,Powervu, biss key auto update software via FTP